RTK Premium in Indiana

CoverageThe coverage map shows networks over the whole of Indiana by area; check your site for 1 network or 2+ networks
FrameNAD83(2011), epoch 2010.0; ITRF on request
AccuracyUnder 1.5 cm horizontal, 2.5 cm vertical, in a fixed solution
Service level99.9% monthly availability for RTK Premium where the coverage map shows an Eligible Area
Trial14 days on your own receiver; your account arrives by email within two working hours
PriceIn the US, RTK Premium costs $900 per device per year, RTK Core $690 and RTK Access $350, excluding sales tax. Monthly plans run from $39 to $100.
SupportBusiness days, 03:00 to 17:00 Eastern Time (09:00 CET to 17:00 ET)
StreamRTCM 3.x over NTRIP; caster rtkpremium.xyz, port 2101, mountpoint COMMON

Check it before you commit

Setup guides

More than 100 step-by-step guides cover receivers, controllers, drones and machine control.

Find your device

Test it yourself

RTKTEST.com compares up to three correction services against a surveyed point in one 15-minute session, and the 14-day trial runs on your own receiver at your own sites.

Open RTKTEST.com

Correction services in Indiana

Indiana crews choose between the state DOT network, commercial network RTK, crowd-sourced base stations, satellite-delivered corrections and their own base.

TypeTypical operatorWhat to check
State networkThe state DOT, at no cost, with logins issued once a signed user agreement is returned.Coverage near your sites, whether an availability commitment is published, and support hours.
Commercial network RTKA private provider with stations across several states.How many correction sources serve your area, the published service level and its remedy, and the term.
Crowd-sourced networkIndependent owners hosting single base stations.Distance to the nearest base, station uptime, and how each base was surveyed.
Satellite or state-space (PPP-RTK, SSR)A provider broadcasting an error model without a local base.Convergence time, accuracy and vertical performance.
Your own baseYour crew, on a surveyed point.The survey of the base point, range, and the time spent setting it up and guarding it.

Coordinates and heights

RTK Premium delivers NAD83(2011), epoch 2010.0, on every Indiana connection, and ITRF on request. Indiana uses two State Plane zones under NAD83: East and West. Indiana also has a county-based system, the Indiana Geospatial Coordinate System (InGCS), which the state DOT publishes with one zone for each of the 92 counties. Set the project, the controller and the correction service to the same frame and zone before the job starts.

Setup

  1. Start the 14-day free trial on this site, or order a subscription. Your account arrives by email within two working hours.
  2. Enter the caster rtkpremium.xyz, port 2101 and mountpoint COMMON in your controller or receiver, with the username and password from your account.
  3. Measure a control point you trust before the job starts, and compare the result with its published coordinates in your project's frame.

Setup guides for receivers, controllers and machines

Industries using precise positioning or RTK corrections in Indiana

Farmland: Indiana had 51,500 farm operations on 14,500,000 acres operated in 2025. Planting, side-dressing and auto-steer across those acres run on a correction that has to hold pass after pass. (USDA NASS, State Agriculture Overview, 2025)

Roads: Indiana had 97,401 miles of public road in 2024, 68,769 of them rural. Paving, ditching and culvert replacement on those roads are staked against design. (FHWA, Highway Statistics, Table HM-10, 2024)

State highways and bridges: The state DOT maintains more than 29,000 lane miles of highway in Indiana, over 11,200 centerline miles, and is responsible for more than 5,700 bridges. Lane additions and bridge replacements on that system are set out from surveyed control. (Indiana Department of Transportation, accessed Nov 2026)

Rail: Indiana has approximately 4,500 rail miles, which the state DOT supports. Track surveys, clearance checks and new sidings are measured against design. (Indiana Department of Transportation, accessed Nov 2026)

Power plants: Coal was the primary energy source for electricity in Indiana in 2024, and the state's power plants had a net summer capacity of 27,837 megawatts. Plant sites, ash ponds and transmission routes are surveyed against design. (U.S. Energy Information Administration, 2024)

Questions about RTK in Indiana

Which RTK correction service serves Indiana?

RTK Premium serves Indiana with network RTK in NAD83(2011), epoch 2010.0. The coverage map shows where 1 network and where 2+ networks serve a site.

Is there a free RTK network in Indiana?

Yes. The state DOT runs a real-time network at no cost, and it issues logins once a user returns a signed user agreement. Check its coverage near your sites and what it commits to on availability and support.

How much does RTK cost in Indiana?

RTK Premium costs $900 per device per year, RTK Core $690 and RTK Access $350, with monthly plans from $39 to $100, excluding sales tax.

Which reference frame and zone do I use in Indiana?

RTK Premium delivers NAD83(2011), epoch 2010.0, with ITRF on request. Project the coordinates into the Indiana State Plane zone for your site, East or West, or into the InGCS zone for your county.

What is the Indiana Geospatial Coordinate System?

InGCS is the county-based system the state DOT publishes for Indiana, with one zone named after each of the 92 counties. RTK Premium delivers NAD83(2011), so project the coordinates into the InGCS zone for your county in your controller or office software.

How accurate is RTK in Indiana?

In a fixed solution under good conditions, RTK Premium reaches under 1.5 cm horizontally and 2.5 cm vertically.

Can I try it before I buy?

Yes. The 14-day free trial runs on your own receiver and needs no payment.

Last updated: 7 November 2026

Try RTK Premium in Indiana

Run the 14-day trial at your own Indiana sites, in your own State Plane or InGCS zone, before you commit to a plan.